Custom Yogurt Drink Packaging Stand Up Spout Pouch with Cap

Short Description:

For yogurt drinks, we make stand up spout pouches with cap in PET/PE film with welded seams and spout joints that resist leaks. The pouch stands upright, and the cap reseals the spout after each pour. Size, thickness, spout spec and printing are tailored to your order. Request pricing from HUIYANG PACKAGING.


Product Detail

Product Tags

Custom liquid spout bags
Product Description

Bag Type: This stand up spout pouch comes with a cap on the spout and a base that holds it upright on the shelf, so yogurt is poured or squeezed out and the cap closes it again.

Premium Quality: Seal strength, cap fit and print registration are checked pouch by pouch before packing, so every carton matches the approved sample.

Heat Seal: The PE inner layer is fused under heat along the seams and around the spout base, so the pouch closes without adhesive and the seal line stays flat.

Material: PET/PE film pairs a stiff printed polyester outer layer with a PE inner sealing layer, and other structures can be customized to your fill and shelf life.

Properties: Welded seams and the spout joint resist leaks, so the pouch can be squeezed without yogurt seeping at the edges, and the cap keeps the spout closed between servings.

Customization: Colors, print quality, bag size, film thickness and surface finish are made to order, and we provide samples for you to check before mass production.

Certification: Production is certified under ISO 9001, BRC Packaging and HACCP, and documents can be shared for your supplier review.

Application: Suitable for yogurt, drinking yogurt, yogurt smoothies, fruit puree and other pourable or squeezable dairy products.

Custom Yogurt Drink Packaging Stand Up Spout Pouch with Cap
Custom Yogurt Drink Packaging Stand Up Spout Pouch with Cap
Custom liquid spout bags
Custom liquid spout bags
Custom liquid spout bags
Custom liquid spout bags
详情页1_06
详情页1_07
详情页1_08
详情页1_11
详情页1_12
详情页1_13

FAQ

Q1: What material is used, and why PET/PE for juice?

A1: PET/PE pairs a stiff printed outer layer with a PE inner sealing layer. The PET side carries the artwork and keeps the pouch wall firm, while the PE side gives the spout a weldable surface and closes the pouch against liquid. This two-layer build suits juice packed and sold through normal retail channels.

Q2: How is the spout attached, and does it leak at the joint?

A2: The spout base is welded to the PE inner layer, so the joint is formed between the same material rather than between film and a coated insert. Seal temperature, pressure and dwell time are set per film gauge, since an under-welded base leaks at the flange while an over-welded one thins the film around it.

Q3: Can the pouch hold acidic juices such as citrus or berry drinks?

A3: Yes. The PE inner layer is the layer in contact with the liquid, and PE resists fruit acids well, so the pouch suits citrus, berry and mixed fruit products. For highly concentrated acids or long ambient storage, tell us the product and pH so we can confirm the film structure.

Q4: How is the pouch filled, and does it stand during filling?

A4: The pouch is filled through the open spout before the cap is applied, and the folded base opens flat so the pack stands on the filling line without support. Fill volume, spout diameter and base width are matched together, since a base too narrow for the fill weight makes the pouch lean once it is full.

Q5: Can the spout type and cap be customized?

A5: Spout position can be centred or set to a corner, and the cap can be supplied in different colours to match the design. Both choices affect the fill line and the pour angle, so we confirm them together with the artwork rather than after plates are made.

Q6: Is the pouch suitable for hot filling?

A6: Standard PET/PE is built for ambient or chilled filling. Hot filling needs a film structure that tolerates the fill temperature without shrinking at the seal, so send us the fill temperature and cooling method and we will confirm whether the structure needs to change.

Q7: What printing options are available?

A7: Gravure printing in high colour counts is the standard for this pouch, with matte or glossy finish on the outer PET layer. Artwork is proofed before production, and the spout area is kept clear so the print does not interfere with the weld zone.

Q8: What is the minimum order quantity, and can I get a sample?

A8: Our standard MOQ depends on pouch dimensions, film structure, spout type and cylinder count. Trial batches for new product launches are supported, and samples are available so you can test the spout weld, cap fit and pour before ordering.

详情页1_15

  • Previous:
  • Next:

  • Related Products