Custom Printed Spout Pouch for Juice Beverage Packaging
Bag Type: This custom stand-up spout pouch for juice holds a folded base and a welded spout at the top, so the pack stands upright on shelf and pours without a separate cup.
Material Structure: PET/PE film pairs a stiff printed outer layer with a PE inner sealing layer, giving juice packaging a firm wall for printing and a weldable surface at the spout.
Leak Resistance: The spout is welded to the PE inner layer and closed with a screw cap, so the seal holds at the joint rather than relying on the cap alone during storage and transport.
Full Customization: Bag size, film structure, spout type, cap colour and printed artwork are all customizable, with OEM and ODM support for private label juice lines.
Certified Manufacturing: Production of every juice spout pouch follows ISO 9001, BRC Packaging and HACCP standards, with quality and food safety checks completed before shipment.
Application: The same spout pouch suits fruit juice, juice concentrates, dairy drinks and other liquid foods, with film structure adjusted to each product and shelf life target.
FAQ
Q1: What material is used, and why PET/PE for juice?
A1: PET/PE pairs a stiff printed outer layer with a PE inner sealing layer. The PET side carries the artwork and keeps the pouch wall firm, while the PE side gives the spout a weldable surface and closes the pouch against liquid. This two-layer build suits juice packed and sold through normal retail channels.
Q2: How is the spout attached, and does it leak at the joint?
A2: The spout base is welded to the PE inner layer, so the joint is formed between the same material rather than between film and a coated insert. Seal temperature, pressure and dwell time are set per film gauge, since an under-welded base leaks at the flange while an over-welded one thins the film around it.
Q3: Can the pouch hold acidic juices such as citrus or berry drinks?
A3: Yes. The PE inner layer is the layer in contact with the liquid, and PE resists fruit acids well, so the pouch suits citrus, berry and mixed fruit products. For highly concentrated acids or long ambient storage, tell us the product and pH so we can confirm the film structure.
Q4: How is the pouch filled, and does it stand during filling?
A4: The pouch is filled through the open spout before the cap is applied, and the folded base opens flat so the pack stands on the filling line without support. Fill volume, spout diameter and base width are matched together, since a base too narrow for the fill weight makes the pouch lean once it is full.
Q5: Can the spout type and cap be customized?
A5: Spout position can be centred or set to a corner, and the cap can be supplied in different colours to match the design. Both choices affect the fill line and the pour angle, so we confirm them together with the artwork rather than after plates are made.
Q6: Is the pouch suitable for hot filling?
A6: Standard PET/PE is built for ambient or chilled filling. Hot filling needs a film structure that tolerates the fill temperature without shrinking at the seal, so send us the fill temperature and cooling method and we will confirm whether the structure needs to change.
Q7: What printing options are available?
A7: Gravure printing in high colour counts is the standard for this pouch, with matte or glossy finish on the outer PET layer. Artwork is proofed before production, and the spout area is kept clear so the print does not interfere with the weld zone.
Q8: What is the minimum order quantity, and can I get a sample?
A8: Our standard MOQ depends on pouch dimensions, film structure, spout type and cylinder count. Trial batches for new product launches are supported, and samples are available so you can test the spout weld, cap fit and pour before ordering.
